We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Spare Tire Cover Boat Guide: How to Choose, Fit and Protect It (2026)

Learn how to pick, measure and fit a spare tire cover boat trailer needs to keep UV, road grime and moisture off your tire and extend its life.

Updated November 2026

A spare tire cover for a boat is a fabric or vinyl shell that protects a trailer’s spare from sun, road grime, salt and moisture. This guide shows you how to match a spare tire cover boat trailers need to your tire size, mount it securely and keep it clean so the spare is ready when you need it. The steps apply whether your spare hangs off the trailer frame, sits under the bunk area or rides in a bracket on the tongue.

Measure Your Spare Before You Buy

Covers are sized by tire diameter and width, so start by measuring the spare itself rather than relying on the trailer’s tire size on the sidewall alone. Spares are often a different size or a smaller temporary unit, and a cover that fits the running tires may be too loose on the spare.

Shopping for one? See our guide: Top 6 Spare Tire Cover Boat Trailer Picks for Every Need (2026).

  1. Measure the outside diameter from the top of the tread to the opposite side, through the center of the wheel.
  2. Measure the tread width at its widest point.
  3. Check the tire’s load and speed rating on the sidewall, and note whether the spare is mounted on a steel or aluminum rim.
  4. Note the bolt pattern and any hub or lug nut cutouts if the cover needs to fit over a mounted wheel.

Manufacturers specify cover sizes by diameter range, so compare your measurements against the size chart listed for each product before ordering.

Choose the Right Cover Material

Material determines how well the cover handles UV exposure and moisture. Vinyl and heavy-duty polyester are the most common choices for trailer spares. Vinyl sheds water well and resists salt spray, while woven polyester breathes better and is less likely to trap condensation against the tire. Look for UV-treated fabric if your trailer lives outdoors in full sun, since untreated material tends to fade and crack within a few seasons according to owners’ reports.

Mount the Cover Securely

A loose cover flaps at highway speeds, rubs the paint and can work its way off. Most designs use an elastic hem, drawstring or Velcro closure around the tire’s outer edge. Check that the cover stays centered and that the tire tread is fully enclosed without the fabric pulling tight across the sidewall. If the spare sits on an exposed mount, tie or strap the cover at the hub so wind can’t lift it.

Check Clearance Before Driving

Once the cover is on, confirm it does not touch the fender, brake line, bunk or any moving part. Drive a short distance, stop and recheck the fit. A cover that shifts or rubs can wear through quickly, especially on a trailer that bounces over rough launch ramps.

Maintain the Cover and the Spare

Rinse the cover with fresh water after launching in saltwater, then let it air dry fully before storing. Trapped moisture encourages mildew on fabric covers and corrosion on steel rims. Remove the cover every few months to inspect the tire for cracks, dry rot and proper inflation, then put it back on.

Common Mistakes

  • Buying by trailer tire size instead of measuring the actual spare.
  • Leaving a damp cover on for weeks, which invites mildew and odor.
  • Skipping the inspection, so a cracked spare stays hidden under the fabric.
  • Ignoring rubbing points, which can wear holes in the cover within a season.
  • Storing the spare inflated to the sidewall maximum in hot weather; check the inflation pressure the tire manufacturer specifies.
  • Heavy-duty trailer tire cover for a snug, UV-resistant fit over an exposed spare. View on Amazon
  • Tire pressure gauge to verify the spare is inflated correctly before each trip. View on Amazon
  • Tire and rim cleaner for removing salt and road grime without damaging the finish. View on Amazon

FAQ

Does a spare tire cover really help the tire last longer?

Yes, in most cases. A cover limits UV exposure, which is a major cause of sidewall cracking, and keeps water and road salt off the rubber. Owners often report longer spare life when covers are kept clean and dry.

Can I use a cover on a spare that is mounted under the trailer?

Usually not as sold. Under-trailer spares need a cover designed for that mount, and fitting an incorrect cover can cause rubbing against the frame. Check the product’s mounting instructions first.

How often should I check the spare under the cover?

Inspect it every few months and before any long trip. Look for cracks, bulges, low pressure and embedded debris. For specific safety or tire-replacement questions, consult a qualified tire professional.

Conclusion

Measure the spare, choose a material that suits your waters and sun exposure and mount the cover so it stays put at highway speed. Clean and inspect it regularly, and the spare will be ready when you need it. A careful check each season keeps the cover doing its job.

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our houseboating guides, checking product details against manufacturer specifications and owner feedback.

About the author

Lauren Holland
Lauren Holland

Lauren Holland writes reviews and buying guides for Discover Houseboating.