We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Screw in Anchor for Boat: 6 Best Picks Compared (2026)

Looking for a screw in anchor for boat? Compare six stainless steel sand anchors by use, size and rope length to find the right one for your boat.

Screw in Anchor for Boat: 6 Best Picks Compared (2026)

Updated November 2026

Choosing a screw in anchor for boat use comes down to where you anchor, how much weight your boat carries and how easily you can set and retrieve the anchor without leaving the helm. Screw-in designs, sometimes called sand anchors or screw in boat anchors, are built to bury into sand, silt or soft bottoms rather than hook onto rock or weed. The six models below were compared on the criteria that matter most for houseboats, pontoons and smaller shallow-water craft: material, shank length, rope length, included accessories and the water conditions each one is marketed for. This is a research-based comparison of specifications and owner feedback patterns, not a record of hands-on testing.

Our top picks at a glance

  1. 1BeneLabel 36" Sand Anchor for Boat with 32ft Rope Screw in Boat Anchor PoleTOP CHOICEBest overallBeneLabel 36" Sand Anchor for Boat with 32ft Rope Screw in Boat Anchor PoleView on Amazon
  2. 2BeneLabel 36" Boat Anchor with 32ft Rope Screw Sand Anchor for PontoonTOP CHOICEBest for larger pontoonsBeneLabel 36" Boat Anchor with 32ft Rope Screw Sand Anchor for PontoonView on Amazon
  3. 3Insaga 17'' Sand Anchor for Boat with 32ft Rope, 304 Stainless Steel BTOP CHOICEBest for small craftInsaga 17'' Sand Anchor for Boat with 32ft Rope, 304 Stainless Steel BView on Amazon
  4. 4BeneLabel 2Pack 17" Boat Anchor with 32ft Rope Screw Sand Anchor for BoatBest for a backup setupBeneLabel 2Pack 17" Boat Anchor with 32ft Rope Screw Sand Anchor for BoatView on Amazon
  5. 5BeneLabel 17" Boat Anchor with 32ft Rope Screw Sand Anchor for BoatBest budget pickBeneLabel 17" Boat Anchor with 32ft Rope Screw Sand Anchor for BoatView on Amazon
  6. 617" Sand Bar Anchors for Boats 304 Stainless Steel Screw in Boat AnchorBest for simple sandbar use17" Sand Bar Anchors for Boats 304 Stainless Steel Screw in Boat AnchorView on Amazon

Our Top Picks

Quick Comparison

Product Best for Key feature
BeneLabel 36″ Sand Anchor for Boat with 32ft Rope Screw in Boat Anchor Pole Overall use on pontoons and shallow water 36-inch length with 32 ft rope and 304 stainless steel build
Insaga 17″ Sand Anchor for Boat with 32ft Rope Kayaks, jet skis and small boats Fully welded body with crossbar
BeneLabel 2Pack 17″ Boat Anchor with 32ft Rope Carrying a spare or using two anchors Two anchors included with 32 ft rope each
BeneLabel 17″ Boat Anchor with 32ft Rope Budget-minded single-anchor setups Compact 17-inch screw design
17″ Sand Bar Anchors for Boats 304 Stainless Steel Screw in Boat Anchor Simple sandbar stops Stainless steel screw-in head
BeneLabel 36″ Boat Anchor with 32ft Rope and Hook and Float Ball Larger pontoons and houseboats in soft bottoms Float ball and hook for easy retrieval

BeneLabel 36″ Sand Anchor for Boat with 32ft Rope Screw in Boat Anchor Pole

BeneLabel 36" Sand Anchor for Boat with 32ft Rope Screw in Boat Anchor Pole | 304 Stainless Steel Boats Beach Anchor for Sandbar, Jet Ski, Kayak, Pontoon Boats, Shallow Water

BeneLabel 36" Sand Anchor for Boat with 32ft Rope Screw in Boat Anchor Pole | 304 Stainless Steel Boats Beach Anchor for Sandbar, Jet Ski, Kayak, Pontoon Boats, Shallow Water

View on Amazon

Best for: Overall use on pontoons and shallow-water boats that need a longer, deeper-set anchor.

This is a good fit for boaters who anchor in soft sand or silt and want more holding length than a 17-inch screw can offer. Its longer pole makes it easier to drive into deeper, firmer layers.

Key specs

  • Length: 36 inches
  • Rope: 32 ft
  • Material: 304 stainless steel
  • Intended use: sandbars, shallow water, pontoons

Pros

  • Longer shank reaches deeper holding material
  • 304 stainless resists corrosion in fresh and salt water
  • Rope length suits most shallow-water setups

Cons

  • Longer pole is harder to store in tight lockers
  • Heavier to handle when retrieving by hand

Bottom line: A strong first choice for pontoon owners who want one anchor that handles most sandbar conditions.

View on Amazon

Insaga 17″ Sand Anchor for Boat with 32ft Rope, 304 Stainless Steel Boat Sand Anchor with Crossbar

Insaga 17'' Sand Anchor for Boat with 32ft Rope, 304 Stainless Steel Boat Sand Anchor with Crossbar, Fully Welded Screw in Boat Anchor for Kayak, Jet Ski, Pontoon, Shallow Water, Beach and Sandbar Use

Insaga 17'' Sand Anchor for Boat with 32ft Rope, 304 Stainless Steel Boat Sand Anchor with Crossbar, Fully Welded Screw in Boat Anchor for Kayak, Jet Ski, Pontoon, Shallow Water, Beach and Sandbar Use

View on Amazon

Best for: Small boats, kayaks and jet skis in shallow water.

Owners of smaller craft often want a light anchor that stows easily. The crossbar adds leverage when twisting the screw into the bottom, which helps with firmer sand.

Key specs

  • Length: 17 inches
  • Rope: 32 ft
  • Material: 304 stainless steel
  • Construction: fully welded with crossbar

Pros

  • Crossbar gives a practical grip for turning the screw
  • Compact size fits small-boat storage
  • Fully welded body reduces weak joints

Cons

  • Shorter shank may not hold well in deep or very soft sand
  • Not sized for larger pontoons or houseboats

Bottom line: A sensible pick for kayaks, jet skis and small shallow-water boats that rarely face strong current.

View on Amazon

BeneLabel 2Pack 17″ Boat Anchor with 32ft Rope Screw Sand Anchor for Boat

BeneLabel 2Pack 17" Boat Anchor with 32ft Rope Screw Sand Anchor for Boat | 304 Stainless Steel Boat Sand Anchor Shallow Water Boat Beach Anchor for Sandbar, Jet Ski, Kayak, Pontoon Boats, Sand Bar

BeneLabel 2Pack 17" Boat Anchor with 32ft Rope Screw Sand Anchor for Boat | 304 Stainless Steel Boat Sand Anchor Shallow Water Boat Beach Anchor for Sandbar, Jet Ski, Kayak, Pontoon Boats, Sand Bar

View on Amazon

Best for: Carrying a spare or using two anchors for a more secure stop.

Two anchors give you a backup if one fails to set, and they let you run a bow and stern setup in a sandbar or shallow cove.

Key specs

  • Length: 17 inches each
  • Quantity: 2
  • Rope: 32 ft each
  • Material: 304 stainless steel

Pros

  • Two anchors allow a backup or dual-anchor setup
  • Stainless build suits repeated saltwater use
  • Good value for two-anchor rigs

Cons

  • Two anchors take up more deck and locker space
  • Ropes can tangle if not stored separately

Bottom line: Best for owners who want redundancy or need to anchor from both ends of the boat.

View on Amazon

BeneLabel 17″ Boat Anchor with 32ft Rope Screw Sand Anchor for Boat

BeneLabel 17" Boat Anchor with 32ft Rope Screw Sand Anchor for Boat | 304 Stainless Steel Boat Sand Anchor Shallow Water Boat Beach Anchor for Sandbar, Jet Ski, Kayak, Pontoon Boats, Sand Bar

BeneLabel 17" Boat Anchor with 32ft Rope Screw Sand Anchor for Boat | 304 Stainless Steel Boat Sand Anchor Shallow Water Boat Beach Anchor for Sandbar, Jet Ski, Kayak, Pontoon Boats, Sand Bar

View on Amazon

Best for: Budget-minded single-anchor setups on small to mid-size boats.

This is the single-anchor version of the 17-inch BeneLabel design. It suits boaters who want the same basic build without paying for a second unit.

Key specs

  • Length: 17 inches
  • Rope: 32 ft
  • Material: 304 stainless steel

Pros

  • Lower-cost entry point in the BeneLabel line
  • Same stainless material as the larger models
  • Easy to store on small craft

Cons

  • Shorter shank than the 36-inch models
  • Single anchor leaves no backup

Bottom line: A practical budget pick for light boats that anchor in calm, sandy water.

View on Amazon

17″ Sand Bar Anchors for Boats 304 Stainless Steel Screw in Boat Anchor

17" Sand Bar Anchors for Boats 304 Stainless Steel Screw in Boat Anchor

17" Sand Bar Anchors for Boats 304 Stainless Steel Screw in Boat Anchor

View on Amazon

Best for: Simple sandbar stops where the anchor only needs to hold briefly.

Boaters who mainly use a sandbar for lunch or a short swim stop may not need a heavy-duty setup. This model covers those basic needs.

Key specs

  • Length: 17 inches
  • Material: 304 stainless steel
  • Design: screw-in boat anchor

Pros

  • Simple design is easy to understand and use
  • Stainless steel resists rust
  • Works well for short stops

Cons

  • Rope length is not as clearly specified as the other listings
  • May not hold in strong current or deep, loose sand

Bottom line: Suitable for casual sandbar stops, but less ideal for overnight or windy anchoring.

View on Amazon

BeneLabel 36″ Boat Anchor with 32ft Rope and Hook and Float Ball, Sand Anchor for Pontoon Boat

BeneLabel 36" Boat Anchor with 32ft Rope Screw Sand Anchor for Pontoon Boat | 304 Stainless Steel Boat Sand Anchor and Rope with Hook and Float Ball Boat Beach Anchor for Sandbar, Jet Ski, Kayak

BeneLabel 36" Boat Anchor with 32ft Rope Screw Sand Anchor for Pontoon Boat | 304 Stainless Steel Boat Sand Anchor and Rope with Hook and Float Ball Boat Beach Anchor for Sandbar, Jet Ski, Kayak

View on Amazon

Best for: Larger pontoons and houseboats anchoring in soft bottoms where retrieval matters.

The float ball and hook make it easier to find and lift the anchor from the water, which is useful when the bottom is murky or you are working alone.

Key specs

  • Length: 36 inches
  • Rope: 32 ft
  • Included: hook and float ball
  • Material: 304 stainless steel

Pros

  • Float ball helps locate the anchor after release
  • Longer shank suits deeper sand
  • Hook simplifies handling the rope

Cons

  • Float ball adds bulk to storage
  • Longer, heavier design is harder to handle on small craft

Bottom line: A good match for pontoon and houseboat owners who value easy retrieval as much as holding power.

View on Amazon

Buying Guide

Shank Length and Bottom Type

Longer shanks reach deeper, firmer layers. A 36-inch anchor generally suits soft, deep sand better than a 17-inch model, while shorter screws are adequate for shallow, compact bottoms. If you regularly anchor in silt, lean toward the longer options.

Good picks for this: BeneLabel 36″ Sand Anchor for Boat; BeneLabel 36″ Boat Anchor with Float Ball

Material and Corrosion Resistance

Look for 304 stainless steel, which manufacturers commonly specify for marine hardware because it resists corrosion better than plain steel. Welded joints are also worth checking, since weak welds are a common failure point.

Good picks for this: Insaga 17″ Sand Anchor for Boat; BeneLabel 2Pack 17″ Boat Anchor

Rope Length and Scope

Most listings in this group include 32 feet of rope. Scope is the ratio of rope to water depth; a common guideline is about 5:1 to 7:1 for holding. In 4 feet of water, 32 feet of rope gives you a sensible margin for a short stop, but check your local rules and conditions before relying on it overnight.

Good picks for this: BeneLabel 36″ Sand Anchor for Boat; BeneLabel 17″ Boat Anchor

Boat Size and Fit

Match the anchor to the boat. Small craft and kayaks do well with 17-inch designs, while pontoons and houseboats usually benefit from longer anchors with more holding power. Consider how much deck space you have for stowing the anchor and rope.

Good picks for this: Insaga 17″ Sand Anchor for Boat; BeneLabel 36″ Boat Anchor with Hook and Float Ball

Retrieval and Handling

A float ball and hook make it easier to spot and lift the anchor, especially in murky water. A crossbar gives you leverage when screwing the anchor into the bottom and removing it again.

Good picks for this: BeneLabel 36″ Boat Anchor with Hook and Float Ball; Insaga 17″ Sand Anchor for Boat

Redundancy and Backup Anchors

If you anchor overnight or in wind, carrying a second anchor is a common safety practice. Two anchors also let you set a bow and stern hold in a sandbar or cove.

Good picks for this: BeneLabel 2Pack 17″ Boat Anchor; BeneLabel 36″ Sand Anchor for Boat

Care and Maintenance

Rinse saltwater off stainless anchors after use, check welds and screw threads for damage, and dry the rope before storing it to prevent mildew. Store the anchor where it cannot shift and injure someone in rough water.

Good picks for this: BeneLabel 17″ Boat Anchor; 17″ Sand Bar Anchors for Boats

FAQ

What is a screw in anchor for boat used for?

A screw in anchor is designed to bury itself in sand, silt or soft bottoms, where it holds by resisting being pulled out of the material. It is most useful in sandbars, shallow coves and lakes with soft bottoms.

Is a screw anchor for boat good for rocky bottoms?

Generally, no. Screw anchors are designed for soft material. On rock or hard clay, they may not set properly. Use a traditional fluke or grapnel anchor in those conditions.

How much rope should I use with a screw in boat anchor?

A common guideline is a scope of 5:1 to 7:1, meaning rope length is five to seven times the water depth at the bow. Adjust for wind, current and how long you plan to stay. Local regulations may also apply.

Should I use one or two anchors?

For short stops in calm water, one anchor is often enough. For overnight anchoring, wind or current, two anchors give you redundancy and let you set a bow and stern hold.

How do I set a screw in anchor?

Lower the anchor to the bottom, then rotate the boat or the anchor pole so the screw turns into the sand. Keep rope tension steady and check that the boat stops drifting before you step away from the helm.

How do I remove a screw in anchor from sand?

Reverse the twisting motion while pulling steadily on the rope. A crossbar or float ball helps with leverage and visibility. Avoid yanking the rope, which can damage the anchor or the line.

Conclusion

For most pontoon and houseboat owners, the BeneLabel 36″ models offer the longest holding reach and the most practical retrieval options, with the float-ball version suiting those who need to find the anchor easily. Smaller boats and kayaks fit well with the Insaga 17-inch design, while the BeneLabel 2Pack suits anyone who wants a backup. Budget-minded boaters with light craft can consider the single 17-inch BeneLabel, and the 17-inch Sand Bar Anchor works for simple, short stops. Match the anchor to your bottom type, boat size and how long you plan to stay.

Sources

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our houseboating guides, checking product details against manufacturer specifications and owner feedback.

About the author

Lauren Holland
Lauren Holland

Lauren Holland writes reviews and buying guides for Discover Houseboating.