We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Jon Boat Storage Boxes: How to Choose, Mount and Use Them (2026)

Learn how to choose, mount and organize jon boat storage boxes so gear stays dry, secure and within reach on every trip, with practical tips for small boats.

Updated November 2026

Jon boat storage boxes give small aluminum and fiberglass jon boats a dry, organized place for tackle, safety gear, tools and spare line. The right box keeps items from sliding around in the bow, shields electronics from spray and makes it easier to find what you need without digging. This guide covers how to pick a box for your boat, where to mount it and how to set it up so it stays useful over the seasons.

Step 1: Measure the Space You Actually Have

Jon boats are narrow and often have limited flat surface, so measure before you shop. Check the length and width of the bow deck, the transom area and any open space under the seats. Leave clearance for your legs, your paddles or motor controls and for anyone moving forward or aft. A box that blocks the bilge drain or covers the bow cleat will cause more problems than it solves.

Shopping for one? See our guide: 4 Best Boat Winter Storage Covers for Off-Season Protection.

Step 2: Choose the Right Type of Box

Most jon boat owners pick from three basic styles. Each suits a different use:

  • Hinged deck boxes sit flat on the seat or deck and work well for tackle and small tools.
  • Dry boxes with gasketed lids protect phones, keys and first-aid supplies from splashes and wet hands.
  • Bow or transom mounted boxes free up floor space and suit anglers who need quick access to lures and rods.

Look for UV-resistant plastic if the boat sits in direct sun, and choose a latch that you can operate with wet or gloved hands.

Step 3: Mount the Box Securely

A box that shifts during a wake or a sudden stop can injure someone or go overboard. Mount it with stainless steel hardware and backing plates where the boat structure allows, and avoid drilling into areas that might leak. Follow these steps:

  1. Dry-fit the box and confirm it clears seats, cleats and the motor.
  2. Mark the mounting holes and check that nothing hides behind them.
  3. Seal each hole with marine-grade sealant before installing fasteners.
  4. Tighten fasteners snugly, then check them after your first few trips.

If you are unsure about drilling into the hull, consult a qualified marine technician before you start.

Step 4: Organize the Contents for Quick Access

Store what you reach for most at the top and near the lid. Keep heavier items low and centered to protect the boat’s trim. Use small dividers or zip pouches to separate hooks, weights and spare parts so nothing rattles. Label compartments if several people use the boat. Many owners also keep a small waterproof bag inside the box for documents and a spare flashlight.

Common Mistakes to Avoid

  • Overloading the box, which adds weight high in the boat and affects stability.
  • Using standard screws in saltwater, which corrode quickly.
  • Skipping the gasket check, leaving water to pool inside the lid.
  • Mounting the box where it blocks access to bilge pumps or the drain plug.
  • Forgetting to rinse the box after saltwater trips to prevent residue buildup.
  • Marine-grade stainless steel fasteners resist corrosion and hold a mounted box securely over time. View on Amazon
  • Marine silicone sealant seals mounting holes against leaks in wet conditions. View on Amazon
  • Small zip-top dividers keep tackle and small parts separated inside the box. View on Amazon

FAQ

Can I store batteries in a jon boat storage box?

Only if the battery is secured upright, vented as the manufacturer specifies and kept away from tackle and fuel. Many owners prefer to keep batteries in a separate ventilated compartment. Consult a marine electrician if you are unsure.

Should the box be fully sealed?

A gasketed lid helps keep out spray and rain, but a small drain hole or vent prevents condensation from building up. Check the box regularly and open it after wet trips to let it dry.

How do I keep the box from taking up too much space?

Choose a low-profile design and mount it on the bow or transom rather than in the middle of the boat. Measure your clearance first so the box does not interfere with seating or movement.

Conclusion

A well-chosen jon boat storage box keeps gear dry, secure and easy to reach. Measure carefully, mount with corrosion-resistant hardware and organize contents by how often you use them. Revisit the setup each season and adjust as your gear list changes. For more ideas on keeping a small boat organized, see Tackle Storage on Boat: A Step-by-Step Guide for Better Organization and Storage Box for Boat: How to Choose, Mount and Organize One (2026).

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our houseboating guides, checking product details against manufacturer specifications and owner feedback.

About the author

Lauren Holland
Lauren Holland

Lauren Holland writes reviews and buying guides for Discover Houseboating.