Boat Cover Boston Whaler Montauk 17: Fit, Measure and Protect Your Boat (2026)
Learn how to choose, measure and fit a boat cover for a Boston Whaler Montauk 17, with steps for a snug fit that sheds rain and resists wind.
Updated November 2026
A boat cover for a Boston Whaler Montauk 17 keeps rain, sun, debris and wind off the hull, console and deck when the boat sits unused. The right cover fits snugly over the console and rails, sheds water and stays put in a breeze. This guide walks through measuring the boat, choosing a fabric and style, and fitting the cover so it lasts through the season.
Measure Your Montauk 17 Before You Shop
Most covers are sized by length, beam and height, and a poor measurement is the most common reason a cover fits badly. Measure from the tip of the bow to the stern, following the hull curve, and check the beam at the widest point. Then measure the height from the waterline to the top of the console or windshield, since that determines how much clearance the cover needs.
Shopping for one? See our guide: 4 Best Boston Whaler Boat Covers for Every Need (2026).
- Measure overall length, bow tip to transom, with a flexible tape.
- Measure beam at the widest point of the gunwale.
- Measure height from the deck to the highest point you want covered, usually the console or T-top.
- Note whether your boat has a bow rail, trolling motor or outboard bracket, since these need cutouts or extra room.
- Compare your numbers against the manufacturer’s size chart, and round up if you are between sizes.
Choose the Right Fabric and Style for Your Boat Cover
Fabric determines how well the cover handles UV, rain and abrasion. Solution-dyed polyester and marine-grade vinyl are common choices, and manufacturers usually list denier and coating details on their product pages. Breathable fabrics reduce trapped moisture, while fully waterproof materials are better for salt air. A cover designed for the Montauk 17’s console shape will sit flatter and collect less water than a generic oversized one.
Fit and Secure the Cover Correctly
A well-fitted cover uses its tie-downs, straps and bungees to stay tight without stretching the fabric. Start by centering the cover from bow to stern, then work the sides down evenly. Secure the front first, then the rear and the sides, and check for loose sections where wind can get underneath.
Steps for a Snug Fit
- Center the cover and pull the front tie-down firmly to the bow eye or trailer hitch.
- Attach side straps under the hull, keeping them clear of the transom.
- Use the drawstring or hem to draw the skirt tight around the gunwale.
- Check that no seams are bunched, since trapped water pools there.
- Install vents or cover supports if your cover has them, to prevent sagging.
Care and Maintenance for Long Service
Rinse the cover with fresh water every few weeks and let it dry before folding. Inspect the straps and grommets each month, because they wear first. Store the cover dry and out of direct sun when the boat is in use, and avoid stacking heavy objects on it.
Common Mistakes to Avoid
- Buying by boat model name alone without checking the dimensions on the size chart.
- Leaving the cover loose, which lets wind lift and tear it.
- Storing a damp cover, which encourages mildew.
- Ignoring the console height, which causes sagging and water pooling.
- Skipping ventilation in humid climates, where condensation builds under the cover.
Recommended Gear
A sturdy set of tie-down straps helps keep the cover secure in strong wind. View on Amazon
Cover support poles keep water from collecting on top of the console and T-top. View on Amazon
FAQ
Will a standard boat cover fit a Boston Whaler Montauk 17?
Not always. A cover sized for a similar length may not account for the Montauk’s console height or beam, so check the manufacturer’s chart against your measurements.
Should I use a breathable or waterproof cover?
Breathable covers reduce condensation and suit humid areas, while waterproof covers work well in heavy rain. Many owners choose a fabric that balances both, depending on local weather.
How long should a boat cover last?
Lifespan depends on fabric, UV exposure and care. Regular cleaning and drying, plus replacing worn straps, helps a cover last longer.
Conclusion
Accurate measurements, a fabric suited to your climate and a careful fit are the three things that make a boat cover work. Take the time to secure it properly and inspect it regularly. A cover that fits well will protect your Montauk 17 through many seasons.
Related reading
- Yamaha Boat Motor Cover Review: Is the Explore Land 600D Worth It?
- Winter Cover for Pontoon Boat: A Step-by-Step Guide for Beginners
- Why Is My Boat Trailer Hub Cover Leaking? 6 Causes and Fixes
- Why Does My Boat Propeller Hitch Cover Matter? Causes, Fixes and Picks
- What Is the World's Best Boat Cover? Top Picks and How to Choose
- West Marine Boat Cover: How to Choose, Measure and Fit One (7 Steps)
Ready to choose one?
