We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Avalon Pontoon Boat Cover: How to Choose, Fit and Care (2026)

Learn how to choose, measure, fit and care for an avalon pontoon boat cover so your deck and upholstery stay dry, clean and protected all season.

Updated November 2026

An avalon pontoon boat cover protects your deck, furniture, canopy and electronics from sun, rain, bird droppings and debris when the boat is not in use. This guide walks you through choosing the right size and material, measuring your pontoon accurately, fitting the cover correctly and keeping it in good shape for years. Whether you are covering a boat at the dock for a weekend or storing it through winter, the steps below will help you get a snug, durable fit.

Step 1: Confirm Your Pontoon Dimensions

Covers are sized by length, beam (width) and, for many models, the height of the T-top or bimini frame. Guessing usually leads to a cover that either flaps in the wind or cannot be pulled over the frame without straining the seams. Start by measuring the boat itself rather than relying on the listed model length, since bow ornaments, swim platforms and outboard motors can add to the overall footprint.

Shopping for one? See our guide: 6 Best Seat Covers for Pontoon Boat (2026): Picks Compared.

  1. Measure overall length from the tip of the bow to the rear of the pontoon tubes or swim platform, whichever extends farther.
  2. Measure beam at the widest point across the pontoon tubes, including any strakes or fence rails that project outward.
  3. Measure the height of the highest point on the T-top or bimini frame from the deck to the top rail.
  4. Note the number and location of any rod holders, antennas, or other protrusions you want to keep covered or clear.
  5. Record the make and model year of the boat, since some manufacturers use slightly different rail heights across production runs.

Write these figures down before shopping. Most covers are sold by length bracket and beam, and many manufacturers publish a fitting chart. Compare your measurements to the chart rather than rounding up a whole size, because an oversized cover is the most common cause of wind damage.

Step 2: Choose the Right Cover Material and Fit Style

Pontoon covers are generally made from woven solution-dyed polyester or vinyl-coated polyester. Solution-dyed fabrics hold color well under sunlight, and coated materials add water resistance. Look for a fabric weight and denier rating that matches your use. Heavier fabrics handle wind and snow loads better, while lighter ones are easier to handle but may wear faster in exposed locations.

Fit styles fall into a few groups:

  • Full-length covers extend from bow to stern and drop down the sides, offering the most complete protection for a boat that sits uncovered for months.
  • Mooring or bimini covers cover only the top and canopy, suitable for a boat that is used often and needs quick access to the deck.
  • Custom-fit covers are cut to a specific boat and usually provide the cleanest look and tightest fit.
  • Universal-fit covers use adjustable straps and tie-downs, making them flexible across similar boats but less precise.

If you are unsure whether to go custom or universal, consider how often you will remove the cover. Custom covers suit owners who want a permanent setup, while adjustable models work better for those who take the cover off frequently.

Step 3: Install the Cover Correctly

Good installation prevents chafing, pooling water and wind lift. Work on a calm day, ideally with a helper, and avoid dragging the cover across the deck or dock edge.

  1. Clean the deck and remove loose items such as cups, fishing gear and cushions.
  2. Lay the cover out on the dock or a clean surface, aligning the front and rear markers with the bow and stern.
  3. Lift the cover over the top of the T-top or canopy and let it settle, keeping it centered front to back.
  4. Work the sides down over the pontoon tubes, smoothing out wrinkles so water runs off rather than collecting.
  5. Fasten the bow and stern straps, then the side tie-downs or snaps, starting in the middle and working outward.
  6. Check that the cover is taut but not stretched tight enough to strain seams or grommets.
  7. Verify that all drain points are clear and that the cover does not dip low enough to trap rainwater.

Setting Support Poles

On boats with a high canopy or on sites that collect snow or standing water, support poles keep the cover from sagging. Set poles in the positions recommended by the cover maker, usually near the bow and stern under the cover’s peak, and adjust them so the surface slopes gently toward the drainage edges. Check pole heights after the first rain, since the fabric can settle slightly.

Step 4: Maintain the Cover Through the Season

A cover that is cared for lasts far longer than one left to accumulate grime and mildew. Inspect and clean it regularly, especially after storms or heavy pollen seasons.

  • Rinse off debris, bird droppings and salt residue with fresh water at least monthly in active seasons.
  • Scrub gently with a soft brush and a mild, pH-neutral cleaner made for marine fabrics. Avoid bleach and harsh solvents, which weaken fibers and coatings.
  • Let the cover dry completely before folding or storing to prevent mildew.
  • Inspect seams, grommets, straps and zippers for fraying or loose stitching, and address small problems before they spread.
  • Store the cover folded loosely in a dry place, away from direct sunlight when it is not on the boat.

Common Mistakes and Tips

  • Buying by model name alone. Two boats marketed under the same name can differ in rail height or length. Measure first.
  • Leaving the cover on while wet for long periods. Trapped moisture encourages mildew and staining. Remove and dry the cover when conditions allow.
  • Skipping tie-downs in windy locations. Wind can lift a poorly secured cover and tear the fabric or damage the frame.
  • Pressure washing the fabric. High-pressure water can break down the coating and fray stitching. A garden hose and soft brush are usually sufficient.
  • Ignoring the drain path. Water pooling on top adds weight and can stretch the cover. Check slope and drain points after each rain.

For a broader look at how covers are chosen and installed for different situations, see Waterproof Pontoon Boat Cover: How to Choose, Fit and Keep It Dry (2026) and Pontoon Boat Cover Canvas: How to Choose, Measure and Fit One (7 Steps). If you plan to leave the boat in the water, Pontoon Boat Cover While Docked: How to Choose and Fit One (7 Steps) covers the specific challenges of dock-side protection.

These items help with installation, drying and long-term care of an avalon pontoon boat cover.

  • Soft-bristle deck brush lets you scrub fabric and seams without abrading the coating. View on Amazon
  • Marine-grade fabric cleaner is formulated to lift grime and mildew without damaging polyester fibers or coatings. View on Amazon
  • Adjustable cover support poles keep the canopy from sagging under rain or snow and help water drain off the surface. View on Amazon
  • Heavy-duty cover tie-down straps secure the cover against wind lift and reduce strain on snaps and grommets. View on Amazon

FAQ

How do I know what size avalon pontoon boat cover to buy?

Measure the boat’s overall length, beam and the height of the top frame, then compare those numbers to the manufacturer’s sizing chart. Choose the bracket that matches your measurements rather than rounding up.

Can I leave an avalon pontoon boat cover on all year?

You can, but you should remove or loosen it during extended wet periods and check it often for trapped water, mildew and wear. Regular drying and inspection extend its life considerably.

Do I need support poles with my cover?

Support poles are most useful on boats with high canopies or in areas that receive heavy rain or snow. They help prevent sagging and standing water. Many owners use them only in the off season.

What is the best way to clean the cover?

Rinse with fresh water, scrub gently with a soft brush and a mild marine-safe cleaner, then rinse thoroughly and allow it to dry fully. Avoid bleach, harsh solvents and high-pressure washers.

How do I stop the cover from flapping in the wind?

Secure all straps and tie-downs, make sure the cover is sized correctly, and use support poles or additional anchor points if the site is exposed. A loose, oversized cover is the usual cause of flapping.

Can a cover prevent sun damage to the deck and upholstery?

A well-fitted, UV-resistant cover reduces direct sun exposure to the deck, seats and canopy, which helps slow fading and cracking. Check the manufacturer’s stated UV rating and expect gradual wear over several seasons.

When should I replace an avalon pontoon boat cover?

Consider replacement when you see persistent leaks, thinning or stiff fabric, widespread seam failure, or grommets that no longer hold. Continuing to use a damaged cover can allow water and debris to reach the boat.

Should I consult a professional about my cover?

If you are unsure about sizing, the condition of your frame, or how to secure the boat at a specific site, a marine service technician or dealer can give accurate, hands-on advice.

Conclusion

A properly sized and fitted avalon pontoon boat cover keeps your boat clean, dry and protected from weather and sun. Measure carefully, choose the right fit style, install with attention to drainage and tie-downs, and maintain the fabric through the season. Taking these steps will extend the life of both the cover and the boat underneath it.

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our houseboating guides, checking product details against manufacturer specifications and owner feedback.

About the author

Lauren Holland
Lauren Holland

Lauren Holland writes reviews and buying guides for Discover Houseboating.