3 Best Reel EZ Boat Cover Options for Trailer Boats (2026)

Updated November 2026

Finding a reel ez boat cover that fits your hull, survives sun and rain, and still lets you pull it on and off without a struggle is harder than it sounds. Most shoppers in this category are protecting a bass, fish-and-ski or V-hull runabout that lives on a trailer, so length, beam and fabric weight matter more than brand names. This guide compares three covers from the trailerable boat cover category, using manufacturer specifications, fabric and build descriptions, and the fit and durability patterns owners commonly report. Each pick is matched to a specific need so you can choose quickly.

Our Top Picks

Product	Best for	Key feature
Kipiea 1300D Boat Cover	Owners of 16 to 18.5 ft V-hull, fish and ski boats	1300D fabric with double PU waterproof coating
CEMOFE Boat Cover 17-19FT	Larger bass and tri-hull runabouts up to 102 in beam	Trailerable design with marine-grade outdoor protection
Mancro 1200D Boat Cover	Budget-conscious owners of 17 to 19 ft tri-hull and bass boats	UV-resistant 1200D fabric with outboard cover coverage

Kipiea 1300D Boat Cover – Heavy Duty Waterproof Boat Covers and Motor Cover

Best for: Owners of 16 to 18.5 ft V-hull, fish and ski boats who want heavy fabric and a coating aimed at keeping rain out.

This cover suits anglers and recreational owners whose boat sits outdoors through wet seasons and needs a sturdy, fully covered shell. The listing name points to a fit range of 16 to 18.5 feet in length and 94 inches in width, so measure your hull before ordering.

Key specs

• Listed length range: 16 to 18.5 feet
• Listed width: 94 inches
• Fabric: 1300D, described as heavy duty
• Coating: double PU waterproof layer
• Includes motor cover coverage, per the listing

Pros

• Heavy denier fabric is generally more resistant to tearing than lighter covers
• Double PU coating is aimed at improving water resistance in rain
• Combined boat and motor cover reduces the number of pieces to manage

Cons

• Heavier fabric is harder to fold and handle alone, especially when wet
• Fit depends heavily on accurate measurement; a loose cover can flap in wind

Bottom line: A strong choice for V-hull and fish-and-ski owners in the 16 to 18.5 foot range who want a heavy, fully waterproof cover and are willing to handle its weight.

View on Amazon

CEMOFE Boat Cover 17-19FT, Waterproof Trailerable Bass Boat Cover

Best for: Larger bass and tri-hull runabouts up to 102 in beam that need a trailerable cover.

This option fits owners of 17 to 19 foot bass, tri-hull and aluminum fish-and-ski boats. The explicit 102-inch beam capacity makes it a good match for wider hulls that some shorter covers cannot accommodate.

Key specs

• Listed length range: 17 to 19 feet
• Maximum beam: up to 102 inches
• Designed to be trailerable, so it can stay on during transport when fitted correctly
• Marketed for marine-grade outdoor protection

Pros

• Stated beam capacity accommodates wider bass and tri-hull boats
• Trailerable design reduces the need to remove the cover before hauling
• Clearly lists compatible hull types, which helps with fit checks

Cons

• Wider coverage means more fabric to tension, and sagging is a common complaint on oversized hulls
• Trailer-on use still requires checking that the cover clears lights, trailer tongue and winch post

Bottom line: Best for owners of wider 17 to 19 foot bass or tri-hull boats who want a trailerable cover and need the larger beam allowance.

View on Amazon

Mancro 1200D Boat Cover, Heavy Duty 17-19ft Waterproof Trailerable Cover

Best for: Budget-conscious owners of 17 to 19 foot tri-hull and bass boats who want UV-resistant protection without heavier-duty fabric.

This cover targets owners who want a trailerable, UV-resistant option for the same 17 to 19 foot hull range as the CEMOFE pick, with a lighter 1200D fabric that is easier to handle.

Key specs

• Listed length range: 17 to 19 feet
• Fabric: 1200D
• UV-resistant marine-grade material, per the listing
• Includes outboard motor cover coverage
• Color: black

Pros

• Lighter 1200D fabric is easier to fold and store than heavier covers
• UV resistance helps slow fading and brittleness of the fabric in sunny climates
• Outboard cover coverage keeps the motor protected in the same purchase

Cons

• Lighter denier means less tear resistance than the 1300D option, so snag-prone spots need care
• Covers in this size range can be hard to tension tightly on very wide hulls

Bottom line: A sensible pick for owners of 17 to 19 foot tri-hull and bass boats who want a UV-resistant, trailerable cover that is easier to handle.

View on Amazon

Buying Guide

Length and beam: measure before you buy

Measure overall length from bow tip to stern, not just the hull length listed in a brochure. Measure beam at the widest point, usually at the gunwales or the rub rail. Add a few inches to both measurements, since most covers are sized for a snug but not stretched fit. Covers listed for a length range, such as 17 to 19 feet, are designed to cover the middle of that range best, so an 18-foot boat is usually the easiest fit.

Good picks for this: CEMOFE Boat Cover 17-19FT, Mancro 1200D Boat Cover

Fabric denier and weight

Denier describes fiber thickness. Higher numbers, such as 1300D, generally mean heavier and more tear-resistant fabric, while 1200D is lighter and easier to handle. Heavier fabric holds up better against wind and branches but is harder to fold when wet. Choose based on how often you will install and remove the cover and how exposed your mooring spot is.

Good picks for this: Kipiea 1300D Boat Cover, Mancro 1200D Boat Cover

Waterproof coating and seams

A waterproof rating alone does not tell you how well a cover sheds rain. Look for a polyurethane (PU) or similar coating, and check whether the listing describes a double coating. Seams are a common leak point, so covers with taped or sealed seams generally resist water better. Plan to re-treat the coating over time as manufacturers recommend.

Good picks for this: Kipiea 1300D Boat Cover, CEMOFE Boat Cover 17-19FT

UV resistance and sun exposure

Constant sun is the main cause of fabric fading, stiffening and seam failure. If your boat sits in full sun most of the year, favor a cover explicitly described as UV resistant and consider a light-colored cover, which typically reflects more heat than dark fabric. Dark covers can run hotter under direct sun.

Good picks for this: Mancro 1200D Boat Cover, CEMOFE Boat Cover 17-19FT

Trailerable versus standard covers

A trailerable cover is designed to stay on while the boat is hauled, which saves time at the launch. Check that the cover’s lower edges and tie-down points clear your trailer’s fenders, lights and tongue. Standard covers are typically removed before towing, which means less strain on fabric and seams during transport.

Good picks for this: CEMOFE Boat Cover 17-19FT, Mancro 1200D Boat Cover

Motor cover and accessories

If you run an outboard, a combined boat and motor cover keeps the engine protected from rain, debris and sun. Confirm the motor cover fits your outboard’s height and cowl shape, and check that a windshield or console is not blocked by the cover’s shape. Straps and buckles should be easy to reach while the cover is on.

Good picks for this: Kipiea 1300D Boat Cover, Mancro 1200D Boat Cover

Care, storage and long-term durability

Dry the cover before folding it to prevent mildew. Clean it with mild soap and water, rinse thoroughly and let it air dry. Store it in a dry place, out of direct sunlight, and avoid folding it along the same creases each time. Inspect straps, buckles and seams at the start of each season, and repair small tears promptly to keep water from working into the fabric.

Good picks for this: Mancro 1200D Boat Cover, Kipiea 1300D Boat Cover

FAQ

Is a reel ez boat cover waterproof?

Covers in this category are marketed as waterproof, usually through a PU coating on the fabric. Waterproof coatings shed rain well at first, but they wear with sun and age. Re-treat the coating as the manufacturer recommends, and keep seams and straps in good condition for the best results.

How do I know what size cover to buy?

Measure your boat’s overall length and widest beam, then compare those numbers to the length range and beam listed on the product. Choose a cover whose range includes your measurements with a few inches of room. If your boat sits between two sizes, the larger size usually fits more easily but may need more tensioning.

Can I leave a trailerable cover on while towing?

Some owners do, but it depends on the cover, the boat and the trailer. Confirm that the cover does not rub against lights, tie-downs or the tow vehicle’s path, and secure all straps before you leave. Check the cover at every stop, since wind at highway speeds can loosen fabric.

Does a heavier denier fabric always mean better protection?

Heavier denier generally means greater tear resistance and durability, which helps in windy or branch-heavy locations. It also means more weight to handle. Choose the heaviest fabric you can comfortably install and remove, rather than assuming the heaviest option is always best.

How do I stop my boat cover from sagging or pooling water?

Use the support system the manufacturer recommends, typically a frame or poles, and tension straps evenly. Make sure the cover is pitched so water runs off rather than collecting in low spots. Re-tighten straps after wind or rain, since fabric can stretch over time.

How often should I clean my boat cover?

Clean it at least once per season, and sooner if it collects algae, bird droppings or tree sap. Use a mild soap and a soft brush, rinse well and let it dry completely before folding. Avoid harsh solvents that can damage the waterproof coating.

Should I cover the motor separately?

A combined boat and motor cover is convenient, but some outboards benefit from a dedicated motor cover, especially in sun-heavy or humid climates. Check that the cover allows ventilation so moisture does not build up underneath, which can lead to corrosion or mildew.

Conclusion

For most owners searching for a reel ez boat cover, the choice comes down to hull size and handling. The Kipiea 1300D Boat Cover suits 16 to 18.5 foot V-hull and fish-and-ski boats where heavy, fully waterproof fabric matters most. The CEMOFE Boat Cover 17-19FT fits wider bass and tri-hull boats that need up to 102 inches of beam and a trailerable design. The Mancro 1200D Boat Cover is the sensible choice for owners of 17 to 19 foot boats who want UV-resistant protection in a lighter, easier-to-handle fabric. Measure your hull carefully, confirm the length and beam range, and match the fabric weight to how often you will install and remove the cover.

Sources

• Boating safety guidance, including equipment and vessel care recommendations (uscg.mil)
• Boat care, storage and winterization tips from a recreational boating organization (boatus.org)
• Marine industry standards and information on boat and engine care

Related reading

• Yamaha Boat Motor Cover Review: Is the Explore Land 600D Worth It?
• Winter Cover for Pontoon Boat: A Step-by-Step Guide for Beginners
• Why Is My Boat Trailer Hub Cover Leaking? 6 Causes and Fixes
• Why Does My Boat Propeller Hitch Cover Matter? Causes, Fixes and Picks
• What Is the World's Best Boat Cover? Top Picks and How to Choose

About the author