How to Clean Boat Cover: A Step-by-Step Guide for Beginners
Learn how to clean a boat cover safely with mild soap, a soft brush and proper drying. Follow these steps to remove mildew and grime without damaging the fabric
Updated November 2026
Knowing how to clean boat cover fabric properly keeps it waterproof, breathable and free of mildew for years longer. The job takes about an hour of active work, plus drying time. You will need a mild cleaner made for marine fabrics, a soft brush, a hose and a clean, dry spot to let the cover air out. Done correctly, this routine removes salt, pollen and algae without stripping the protective coating.
Before You Start: Prepare the Cover and Area
Start on a dry day with temperatures above 50°F, since most manufacturers advise against cleaning fabric in freezing conditions. Remove any loose debris by hand, then shake or brush off leaves and dirt. Check the cover for tears, loose stitching and snaps before you scrub, because water and soap can make small damage worse.
Shopping for one? See our guide: Seal Skin Boat Cover Review: Is It Worth It? (2026).
Lay the cover flat on a driveway, lawn or clean dock surface. Keep the cover off the water and away from gravel that could scratch the vinyl or coated surfaces.
How Do You Clean a Boat Cover Step by Step?
Follow this sequence. It works for most canvas, vinyl-coated polyester and solution-dyed acrylic covers, though you should always check the manufacturer’s care label first.
- Rinse the entire cover with fresh water from a garden hose to loosen surface grime.
- Mix a mild, non-detergent or marine-specific cleaner with lukewarm water according to the label.
- Scrub gently with a soft-bristled brush in small sections, working in the direction of the weave.
- Pay extra attention to seams, zippers and areas where the cover sits against the rails.
- Rinse thoroughly until no suds remain, since leftover soap attracts dirt and can leave residue.
- Let the cover air dry completely in shade before folding or storing it.
Treating Mildew and Stains
For mildew spots, apply a cleaner labeled for marine vinyl or canvas, let it sit for about five minutes, then scrub lightly. Avoid household bleach, which weakens fabric fibers and can discolor the cover. Stubborn stains usually respond better to repeated gentle cleaning than to one aggressive scrub.
Drying and Protecting the Cover After Cleaning
Moisture trapped in folds is the main cause of mildew, so drying is as important as washing. Open all flaps and let air circulate underneath. Once dry, many manufacturers suggest applying a fabric protectant designed for marine covers to restore water repellency. Store the cover in a dry location, and avoid plastic bags, which hold moisture against the fabric.
Checklist: Supplies for Cleaning a Boat Cover
- Garden hose with an adjustable spray nozzle
- Soft-bristled brush or a soft deck brush
- Mild, marine-safe cover cleaner
- Clean buckets for mixing solution
- Fabric protectant (optional, for after drying)
- Clean, dry tarp or floor space for air drying
Common Mistakes to Avoid
- Using pressure washers, which can force water through seams and tear stitching.
- Scrubbing with stiff wire or abrasive pads that roughen the surface.
- Storing the cover while it is still damp.
- Cleaning in direct, hot sun, which can leave streaks and dry soap too fast.
- Skipping a cover inspection, so small tears grow unnoticed.
Recommended Gear
A soft-bristled deck brush makes it easier to clean seams and fabric without damaging the weave. View on Amazon
A marine-safe cover cleaner formulated for vinyl and canvas helps lift mildew without harsh chemicals. View on Amazon
FAQ
How often should you clean a boat cover?
Most owners clean their covers two to four times a season, plus after exposure to salt spray or heavy pollen. Regular light cleaning is easier than tackling heavy buildup later.
Can you put a boat cover in a washing machine?
Generally no. Many covers are too large for home machines, and agitation can damage coatings and seams. Hand cleaning with a soft brush is the safer method.
Is bleach safe for cleaning a boat cover?
Bleach is usually not recommended because it weakens fibers and can cause discoloration. Check the manufacturer’s care instructions, and consult the cover maker before using any strong chemical.
Conclusion
Cleaning your boat cover with mild cleaner, gentle scrubbing and complete drying keeps it performing well for seasons to come. Inspect the cover while you work, and address small tears early. A consistent routine protects both the fabric and the boat underneath.
Related reading
- What Is the World's Best Boat Cover? Top Picks and How to Choose
- West Marine Boat Cover: How to Choose, Measure and Fit One (7 Steps)
- Waterproof Pontoon Boat Cover: How to Choose, Fit and Keep It Dry (2026)
Ready to choose one?
