3 Best 14ft Jon Boat Covers for Every Need (2026)

Updated November 2026

Finding a 14ft jon boat cover that actually fits is harder than it sounds. Jon boats are narrow, flat-bottomed and often sold with a wide range of beam widths, so a cover labeled “14 foot” can still gap, sag or flap in the wind if the beam measurement is off. This guide focuses on three covers sold for 14-foot jon boats, judged by four criteria: fit on the listed length and beam, fabric denier and waterproofing, whether the cover is designed for trailering, and whether it includes a motor cover. Each pick is described from its listing details and common owner feedback patterns, not from personal testing.

Our Top Picks

Each product below is listed in the order that best matches the criteria above. Read the Quick Comparison first, then check the detailed sections for the model that fits your boat and storage setup.

Quick Comparison

Product	Best for	Key feature
GrondNictory Jon Boat Cover 12-14ft 420D	Lightweight, everyday coverage on a 14ft jon boat	Listed to fit up to 70-inch beam width
Caminor Jon Boat Cover 14 ft 900D	Trailering and heavier-duty seasonal use	900D fabric with included motor cover
Fuprosico 1200D Trailerable Jon Boat Cover 14ft	Exposed storage and rough weather	1200D fabric with air vents and hurricane-style strap system

GrondNictory Jon Boat Cover 12-14ft 420D Waterproof Boat Covers Fits Jon Boat 14ft Long and Beam Width up to 70 inches

Best for: Lightweight, everyday coverage on a 14ft jon boat

This cover suits owners who want a simple, affordable-feeling layer of protection from rain, dust and leaves while the boat sits in a driveway, yard or dock slip. It is also a reasonable choice for shorter storage periods where heavy trailering abrasion is not a concern.

Key specs

• Listed for 14ft jon boats
• Listed beam width up to 70 inches
• 420D polyester-style waterproof fabric (per listing)

Pros

• Listed fit range covers the 14ft length and a 70-inch beam
• Lighter fabric is easier to fold and handle alone
• Waterproof coating helps shed rain during typical use

Cons

• 420D fabric is more prone to abrasion than heavier options, especially when trailering
• Owners sometimes report that lighter covers need extra tie-down points in windy conditions

Bottom line: A good first choice if you want straightforward coverage for a 14ft jon boat that stays mostly in one place.

View on Amazon

Caminor Jon Boat Cover 14 ft, 900D Heavy Duty Trailerable Waterproof Jon Boat Cover 14 Foot with Motor Cover, Marine Grade Canvas, Black

Best for: Trailering and heavier-duty seasonal use

This model is aimed at owners who keep the boat on a trailer and travel with it, or who want a sturdier cover for a full season outdoors. The heavier fabric and motor cover make it a practical match for a 14ft jon boat with an outboard.

Key specs

• Listed for 14 ft jon boats
• 900D heavy-duty fabric (per listing)
• Includes a motor cover (per listing)
• Black color

Pros

• Heavier 900D fabric is better suited to trailering and wind
• Included motor cover protects the outboard from the same weather
• Marine-grade canvas-style material is designed for repeated use

Cons

• Heavier fabric is harder to fold and store than lighter covers
• Dark color can get warm in direct sun, which some owners note

Bottom line: Pick this if your 14ft jon boat is trailered often or sits outside through a full season and you want the motor protected too.

View on Amazon

Fuprosico 1200D Trailerable Jon Boat Cover 14ft with Motor Cover, Black

Best for: Exposed storage and rough weather

This cover is built for owners whose boat stays outdoors in open areas, on a dock or mooring, where wind and storms are a real concern. Its heavier fabric and listed ventilation features target condensation and wind loading.

Key specs

• Listed for 14ft jon boats
• Listed beam width up to 70 inches
• 1200D fabric (per listing)
• Includes a motor cover and air vents (per listing)

Pros

• 1200D fabric is the heaviest option in this group
• Air vents help reduce trapped moisture under the cover
• Listed as suitable for mooring and storage use

Cons

• Heaviest fabric makes installation and removal a two-person job for many owners
• Bulkier when folded, which takes up more storage space

Bottom line: The right choice for a 14ft jon boat that lives outdoors on a mooring or in an exposed yard where weather is the main threat.

View on Amazon

Buying Guide

Check the listed length and beam width

Measure your boat’s length overall and its widest point at the gunwales before you buy. A cover that lists 14 feet should still be checked against beam width, because jon boats vary. Covers with a listed maximum beam around 70 inches fit most common 14ft jon boats, but measure to be sure. A cover that is too narrow will strain at the seams; one that is too wide will flap.

Good picks for this: GrondNictory Jon Boat Cover 12-14ft 420D, Fuprosico 1200D Trailerable Jon Boat Cover 14ft

Compare fabric denier

Denier refers to the thickness of the yarn used in the fabric. Higher denier generally means a tougher, more abrasion-resistant cover, though it also adds weight. A 420D cover suits light use; 900D and 1200D fabrics are better for trailering, wind and long outdoor storage.

Good picks for this: Caminor Jon Boat Cover 14 ft 900D, Fuprosico 1200D Trailerable Jon Boat Cover 14ft

Look for a motor cover

If your jon boat has an outboard, a motor cover keeps rain, dew and debris off the engine. Some covers include one, while others leave it as an extra purchase. Check whether the listing says the motor cover is included before you assume it is.

Good picks for this: Caminor Jon Boat Cover 14 ft 900D, Fuprosico 1200D Trailerable Jon Boat Cover 14ft

Consider how the boat will be stored

A boat kept on a trailer in a driveway has different needs from one on a mooring or in an open yard. Trailering exposes covers to road wind and friction, so heavier fabric helps. Stationary storage may favor ventilation and strong tie-down points. Think about your main use before choosing weight.

Good picks for this: Caminor Jon Boat Cover 14 ft 900D, Fuprosico 1200D Trailerable Jon Boat Cover 14ft

Check waterproofing and ventilation

Waterproof coatings shed rain, but trapped moisture can cause mildew and odor. Look for air vents or a design that allows airflow underneath. Ventilation is especially important in humid climates or where the boat stays covered for months.

Good picks for this: Fuprosico 1200D Trailerable Jon Boat Cover 14ft, GrondNictory Jon Boat Cover 12-14ft 420D

Plan for securing the cover

Wind is the most common reason covers fail. Look for tie-down points, grommets, straps or buckles along the bottom edge. Some owners add extra straps or bungee-style tie-downs for exposed locations. Check how the cover attaches before the first storm season.

Good picks for this: Fuprosico 1200D Trailerable Jon Boat Cover 14ft, Caminor Jon Boat Cover 14 ft 900D

Care for the cover

Rinse off salt, dirt and debris before folding. Let the cover dry completely before storing it to prevent mildew. Store it in a dry, shaded location away from sharp objects. Regular inspection of seams and tie-down points catches wear early.

Good picks for this: GrondNictory Jon Boat Cover 12-14ft 420D, Caminor Jon Boat Cover 14 ft 900D

FAQ

Will a cover listed for a 14ft jon boat fit every 14ft jon boat?

Not always. Length is only part of the fit. Beam width, hull shape and whether you have a bow or stern rail all affect fit. Measure your boat and compare against the listed maximum beam before buying.

Is a 420D cover enough for a jon boat that stays outside all year?

It can work in mild climates, but heavier fabrics such as 900D or 1200D generally handle wind, abrasion and long-term exposure better. Consider how much weather your area sees before choosing.

Do I need a separate motor cover?

Not if the cover includes one. If your cover does not, a separate outboard cover protects the engine from rain, dew and debris. Check the listing carefully to confirm what is included.

Can a jon boat cover be left on while trailering?

Some covers are designed for trailering, but the cover should be fastened securely and checked regularly for loose straps. Consult your trailer manufacturer’s guidance and local road rules for securing loads.

How do I keep moisture from building up under the cover?

Choose a cover with air vents, remove the cover periodically to dry the boat when conditions allow, and avoid storing a damp cover. Good airflow reduces mildew and odor.

How should I install the cover in high wind?

Fasten all tie-down points before wind picks up, use extra straps if the cover has them, and check the fit after the first gust. If wind is forecast to be strong, consider removing the cover or moving the boat to a sheltered spot.

Conclusion

For a 14ft jon boat that mostly stays put and needs lightweight coverage, the GrondNictory Jon Boat Cover 12-14ft 420D is the simplest fit to start with. If you trailer the boat or want a sturdier season-long cover with motor protection, the Caminor Jon Boat Cover 14 ft 900D is the better match. For exposed storage on a mooring or in an open yard, the Fuprosico 1200D Trailerable Jon Boat Cover 14ft offers the heaviest fabric and ventilation features in this group. Measure your beam, decide how the boat will be stored, and choose the fabric weight to match.

Sources

• Boating safety and seasonal storage guidance (boatus.org)
• Coast Guard boating safety resources and vessel preparation tips (uscgboating.org)
• Marine industry standards and boat care information

Related reading

• Winter Cover for Pontoon Boat: A Step-by-Step Guide for Beginners
• Why Is My Boat Trailer Hub Cover Leaking? 6 Causes and Fixes
• Why Does My Boat Propeller Hitch Cover Matter? Causes, Fixes and Picks
• What Is the World's Best Boat Cover? Top Picks and How to Choose
• Waterproof Boat Cover Material: Which Fabric Keeps Water Out Best?
• Top 5 Pontoon Boat Guard Cover Picks for Every Need

About the author